Leviton 600 User Manual page 185

User Guide
Editing DDLs in the Console
The example steps below give the general steps for editing a device
definition:
Procedure:
1. Press [SETUP]
2. Press (Device)
3. Press [3]
4. Use the arrow keys to highlight
the device to edit then press [ENTER]
5. Use the arrow keys to highlight the
trait to edit then press [ENTER]
6. Use the arrow keys highlight the
attribute of the trait to edit.
7. Press [1]
(see Table 10.4 below)
8. Use the keypad for numbers or
the up/down arrow keys to
make the edit
9. Press [ENTER]
Definition Menu
Options
[1] Modify Trait
[2] Insert Pan
[3] Insert Tilt
[4] Insert Continuous
[5] Insert Indexed
[6] Insert Union
[7] Delete Trait
Table 10.4 Device Definition Menu Options
Rev. 1.30.03.07.r1
Chapter 10 Automated Devices
Notes:
Opens Setup display
Enters Device Assignment
sub-display
Device menu item 3:
"Edit Definition".
Definition Menu item 1:
"Modify Trait"
Description
Modifies a specific trait of a selected device.
Inserts a pan trait in the position highlighted.
Inserts a tilt trait in the position highlighted.
Inserts a continuous trait in the position
highlighted.
Inserts an Indexed trait in the position
highlighted.
Inserts a Union Trait in the position highlighted.
Deletes the trait highlighted.
Page 173