Recording Real-Time Macros - Leviton 600 User Manual

User Guide

Recording Real-Time Macros

In addition to simply recording keystrokes, the console allows for "Real
Time" recording of macros. This feature can be very useful in building
special types of effects and playing them back as timed macros rather than
the sometimes tedious efforts required to build certain effects.
For example, bump buttons can be used to bump channels in a specific
order in a specific timed sequence to create an effect:
Procedure:
1. Press [SETUP] (Macro)
2. Press [4]
3. Enter macro number to record
4. Press [2]
5. Use the up/down arrow keys
to select "Timed"
6. Press [ENTER]
7. Press [1]
8. Press [STAGE]
9. Press desired bump buttons
10. Press [M1]
To view the actual timing sequence of the keystroke steps, press Menu item
5 from the Macro sub-display.
There are three options to choose from, use the arrow keys to make the
selection then press [ENTER]:
Reference Last: Displays the time between presses of buttons in the
macro.
Reference Begin: Displays a running total of the time accumulated for the
run of the entire macro.
Not Timed: Displays the keystrokes only.
Note that edits may be made to the individual times, see
section further in this chapter.
Rev. 1.30.03.07.r1
Chapter 8 Macros
Notes:
Opens macro sub-display
Menu item 4: Macro Number
1 - 8
Menu item 2: Record Mode
Menu item 1: Record Macro
Initiates macro recording
Note "Macro Recording"
at top of display
Ends recording. Macro Key
number pressed must be
same as initial macro
selected from menu.
Editing Macros
Page 127