Allocating Memory; Setting Number Of Channels - Leviton 600 User Manual

Chapter 12 System Settings

Allocating Memory

Changing the number of channels, submasters, groups, macros and effects
available within the console's memory resources will affect the remaining
resources. By increasing channels, for example, you will reduce the amount
of submasters, groups, etc. Be sure to back up your console before
performing memory allocation. See
information on how to save your work.

Setting number of Channels

The maximum number of conventional control channels on models 24/48,
48/96 and 72/144 is 384 while the maximum on model 600 is 600. The
minimum number on all models is 48 while the system default is 144.These
numbers should not be confused with the number of manual channel
faders. Note that in addition to the amount of conventional control channels
there are 512 dedicated automated device channels, see
Automated Devices.
In some shows you may not need all of the conventional channels available
in your console. By reducing the channel count, you can reduce processing
time and free up console memory.
Follow this example to set up a show with 96 channels:
Procedure:
1. Press [SETUP]
2. Press [7] [ENTER]
3. Enter [96] [ENTER]
4. Select [1] from Memory re-order
confirmation box
Page 188
Chapter11 Memory Functions
Notes:
Opens the Setup display
Selects menu item
7: "Number of channels"
Press [CLEAR] to cancel
for
Chapter 10
Rev. 1.30.03.07.r1