Tracking Mode - Leviton 600 User Manual

User Guide

Tracking Mode

Recording and Editing Live in Tracking Mode
Channels that have new levels
will have hard levels; all other channels will have soft levels.The new hard
levels will then track into subsequent cues as soft levels.
Press [RECORD CUE] [#] [ENTER] to record or edit (re-record) live.
Recording Blind in Tracking Mode
As with recording live, channels that have new levels
from the previous cue will have hard levels and all other channels will have
soft levels.The new hard levels will then track into subsequent cues as soft
levels.
To create a cue in the Tracksheet display, press [CUE] [#] [ENTER] then
enter your channels and levels. Remember that changes are recorded
automatically when working in blind displays.
Editing Blind in Tracking Mode
Blind edits made to existing cues while in the Tracking mode will allow any
channel assigned a new level to continue to read at that level in subsequent
cues until it encounters another hard level. You must be sure you want the
new channel level to continue into later cues, because when you change it
in Tracking mode it can track through a large number of later cues. By
using the Tracksheet, you can see the subsequent cue levels that change as
a result of your edit.
Changes made to a soft level will always change it to a hard level while
any
in
change a soft level into a hard level, see the section on Converting Hard
and Soft Levels later in this chapter.
Rev. 1.30.03.07.r1
Cue Record Mode. To restore a hard level back to a soft level or
which are different
Chapter 5 Cues
from the previous cue
which are different
Page 93