Chapter 12 System Settings
Navigating the Setup Display
Figure 12.0 Sample Setup Display
To navigate within the Setup display, use the keypad to enter a menu item
number then press [ENTER]. The selected menu item parameter is
changed by either entering an applicable alphanumerical value or by using
the up/down arrow keys to toggle a selection. The sections throughout this
chapter demonstrate these techniques.
For descriptions of the Setup display's soft-keys, please see the
Soft-Key Functions in the Setup Display
Page 184
(Actual screen may vary depending on model)
section further in this chapter.
Rev. 1.30.03.07.r1