Chapter 4 Submasters
Recording Submasters in Preview
Submasters can be also be created "in the blind" from the Submaster sub-
display of Preview. Follow the steps below as an example:
Procedure:
1. Press [PREVIEW]
2. Press (SelSub) [#]
3. Press [ENTER]
4. Select channels and set
channel levels
All levels are recorded automatically in the Preview display, it is not
necessary to press the [RECORD SUB] hard-key. If you do use the
[RECORD SUB] key, the active stage levels will be recorded, not the
blind levels.
Editing Submasters in Preview
Follow these steps to edit a previously recorded submaster:
Procedure:
1. Press [PREVIEW]
2. Press (SelSub) [#]
3. Press [ENTER]
4. Select channels and set
new channel levels
Page 50
Notes:
Creates new sub
If Sub has already been
recorded, its levels will show.
Sub recorded
Notes:
Selects sub
Sub recorded
Rev. 1.30.03.07.r1