Leviton 600 User Manual page 184

Chapter 10 Automated Devices
Creating a new DDL in the Console
The procedure below gives the general steps for defining a new device
within the control console:
Procedure:
1. Press [SETUP]
2. Press (Device)
3. Press [4]
4. Enter new device name
5. Press [ENTER]
6. Use the Definition menu to modify or
insert traits accordingly.
7. Use arrow keys to highlight the
trait attribute and select [ENTER] to edit.
8. Press [CLEAR] to return to previous screen.
Follow the example steps below to define a new device and add it to the
device library (a simple fog machine using one trait is used in this
example):
Procedure:
1. Press [SETUP]
2. Press (Device)
3. Press [4]
4. Enter [F] [O] [G]
5. Press [ENTER]
6. Press [4]
(see Table 10.4 below)
7. Use up/down arrow keys to select
"Special" from Trait name popup list
8. Press [ENTER]
Page 172
Notes:
Opens Setup display
Enters Device Assignment
sub-display
Device menu item 4:
"Add Definition"
Use the submaster bump
buttons for letters
See Table 10.4 below
Notes:
Opens Setup display
Enters Device Assignment
sub-display
Device Menu item 4:
"Add Definition"
Use the sub bump buttons for
letters for device name "FOG"
Definition Menu item 4:
"Insert Continuous"
Device Defined
Press [CLEAR] to exit
Rev. 1.30.03.07.r1