Mode; Parked Dimmers - Leviton 600 User Manual

Chapter 3 Setting Channel Levels

+/- Mode

+/- mode can be used to modify individual channel levels within a scene so
that after modification, the changes are retained. It works similar to
channel check but when you move to the next channel, the change is
retained instead of reverting to the previous level. This allows you to
quickly customize the current lighting look.
When soft-key 4 displays "ChnChk", the console is in +/- mode. When
soft-key 4 displays "+/-", the console is in channel check mode.
Follow these steps to modify a lighting look that is currently live:
Procedure:
1. Press [STAGE]
2. Press [1] [AT] [25]
4. Press right arrow key
5. Set channel level with trackball
6. Repeat steps 3 and 4 to finish
editing or establishing desired look
7. Press [CLEAR]

Parked Dimmers

A dimmer can be "parked" from the Dimmer sub-display of the Stage
display. The parked dimmers will not become part of any console recording
and will override any other output from any other process on the console.
Parked dimmer levels are displayed in amber and a "DM" icon is displayed
at the top of the Stage, Device and Playback displays.
To park a dimmer press [STAGE] (Levels) then select and set the dimmer
level with the keypad or trackball.
To release all parked dimmers, place the cursor over the "DM" icon and
press [CHANGE]. To release selective parked dimmers, press [DIMMER]
[#] [AT] [ENTER] where [#] is any individual dimmer or list of dimmers.
Page 40
Notes:
Captures the starting channel
Releases starting channel and
captures next channel
Releases captured channel
Rev. 1.30.03.07.r1