Setting Number Of Effect Steps; Setting Number Of Groups - Leviton 600 User Manual

Chapter 12 System Settings

Setting number of Effect Steps

The console is capable of holding up to 600 recorded Effects. Each Effect
can have up to 100 steps. The total number of steps for all Effects
combined is 9,999. An Effect may be a simple sequential chase of channels
or a complex series of Submasters, Groups, Cues, or Device Traits.
Follow these example steps to set the number of effect steps to 1000:
Procedure:
1. Press [Setup]
2. Press [10] [ENTER]
3. Press [1000]
4. Select [1] from Memory re-order
confirmation box
Chapter 7 Effects
See
Effects.

Setting number of Groups

The console is capable of holding up to 500 Groups. A Group is a recorded
unit of channels or device traits similar to a cue but without timing
information. It can also be thought of as similar to a Submaster but without
a fader. Groups are very useful when programing moving lights.
Follow this example to set the number of Groups available to 120:
Procedure:
1. Press [SETUP]
2. Press [11] [ENTER]
3. Press [120]
4. Select [1] from Memory re-order
confirmation box
Remember, increasing the number of Channels, Groups, Macros,
Effects, Steps and Submasters will affect the remaining amount of
available console memory.
Page 190
for information on the programming and operation of
Notes:
Opens the Setup Display
Selects menu item 10:
"Number of efx steps"
Valid 10 to 9999
Press [CLEAR] to cancel
Notes:
Opens the Setup display
Selects menu item 11:
"Number of groups"
Valid numbers 1 to 500
Press [CLEAR] to cancel
Rev. 1.30.03.07.r1