Creating A Basic Cue - Leviton 600 User Manual

User Guide

Creating a Basic Cue

To create a cue live from the Stage display, you first create the look by
setting channel levels. Then, using the record cue functionality of the
console, you enter the cue number and all required cue attributes. From
this point, pressing the [ENTER] key completes the recording of the cue.
The cue then can be recalled from the playback faders. In-depth examples
are given further in this chapter but here is the general procedure:
Procedure:
1. Set channel levels using channel faders,
keypad, submasters, groups, etc.
2. Press [RECORD CUE]
3. Enter cue number
4. Enter cue attributes
5. Press [ENTER]
The [RECORD CUE] hard-key records all levels that may be
originating from level setting commands, other cues, running effects,
active submasters, groups and selected automated device traits.
Rev. 1.30.03.07.r1
Chapter 5 Cues
Notes:
Initiates recording of a cue
Cue recorded
Page 57