Naming The Show; Naming The File - Leviton 600 User Manual

User Guide

Naming the Show

Setup menu item 1 provides a way to add an alphanumeric name to a
show. The Show Name only appears in the Setup display and can only be
viewed when the show is in active memory.
For example, to assign a Show Name:
Procedure:
1. Press [SETUP]
2. Press [1] [ENTER]
3. Press the submaster bump buttons or
use a keyboard to enter a show name
4. Press [ENTER]

Naming the File

Setup menu item 2 provides a way to specify a DOS style disk file name for
the show in current memory. This name is different from that of the "Show
Name" and must follow naming conventions of a maximum of 8 letters or
numbers. These will appear as "xxxxxxxx.INN" when the disk directory is
viewed on a PC.
For example, to assign a File Name:
Procedure:
1. Press [SETUP]
2. Press [2] [ENTER]
3. Press the submaster bump buttons or
use a keyboard to enter a file name
4. Press [ENTER]
Chapter 11 Memory Functions
See
information on how to install a keyboard.
Rev. 1.30.03.07.r1
Chapter 12 System Settings
Notes:
Opens the Setup display
Selects menu item 1:
"Show name"
Use the [CLEAR] key to erase
Notes:
Opens the Setup display
Selects menu item 2,
"File name"
Use the [CLEAR] key to erase
Appendix A Installation
. See for
Page 185