Selecting Displays; Navigating Displays - Leviton 600 User Manual

User Guide
Cue Record Mode
The current cue record mode appears in the field at the far left of the
command line. One of three cue record modes will appear: Tracking,
Cue Only and Clean Up. Further information about cue record modes can be
found in
Soft-Keys
The soft-keys, numbered 1 – 8, appear at the bottom of the display and
change function according to the current display. The functions of these
soft-keys are executed by pressing the respective console hard-keys labeled
[S1] - [S8]. Some of the soft-keys reveal another level of soft-keys. To
return to the top level of soft-keys in any display, press the display key for
the current display. Individual soft-key functions are explained further in
operational chapters.

Selecting Displays

To change to a different primary display, press one of the eight display
hard-keys on the console as explained earlier in this chapter.
Primary displays may also be
changed by using the trackball
and moving the cursor into the
title bar and pressing the
[CHANGE] key. Select which
display is desired with the
Trackball then press [CHANGE]
again. Pressing the [CLEAR]
key will exit the menu.

Navigating Displays

The arrow keys are used to move within a
display or to change the contents of the display.
The arrow keys will usually have the effect of
scrolling up/down, or left/right, or moving
between different parts of the display.
Additionally, in some displays, holding the
Leviton Logo button while using the arrow keys
will reveal additional functionality. Specific in-
depth functions of the arrow keys are given in
further operational chapters.
Rev. 1.30.03.07.r1
Chapter 5 Cues
.
Chapter 2 Displays
Page 17