Leviton 600 User Manual page 72

Chapter 5 Cues
Recording a Cue with a Single Fade Time
Follow the example steps below to record a cue with a single fade time:
Procedure:
1. Press [STAGE]
2. Press [ENTER] [AT] [ENTER] [CLEAR]
to clear screen (if necessary)
3. Press [50] [AND] [61]
4. Press [FULL]
5. Press [RECORD CUE] [3]
6. Press [TIME] [5]
7. Press [ENTER]
Recording a Cue with Split Fade Times
The [AND] hard-key is used to assign separate up and down times. In the
command line, the up time and down times are shown separated by a "+".
Follow the steps below to record a cue in Stage with split fade times:
Procedure:
1. Press [STAGE]
2. Press [ENTER] [AT] [ENTER] [CLEAR]
to clear screen (if necessary)
3. Press [50] [AND] [61]
4. Press [FULL]
5. Press [RECORD CUE] [5]
6. Press [TIME] [5] [AND] [7]
7. Press [ENTER]
The up time specifies how long it takes for the next cue to fade in. The
down time specifies how long it takes for the previous cue to fade out.
Page 60
Notes:
Selects channels to be
recorded
Not necessary to press the
[AT] key when recording Full
Adds single up/down fade
time of 5 seconds
Records cue 3
Notes:
Selects channels to be
recorded
Not necessary to press the
[AT] key when recording Full
Adds split up/down fade times
of 5 and 7 seconds
Records cue 5
Rev. 1.30.03.07.r1