Summary Of Warnings And Cautions - Newport New Focus Picomotor 8743-CL User Manual

Controller/driver

Table of Contents

Introduction

1.2.3

Summary of Warnings and Cautions

The following general warning and cautions are applicable to this instrument:

The Picomotor Controller/Driver is incomplete in constructional

features and is considered only to be a component for the

purposes of regulatory compliance. It is "equipment for building

in;" a suitable enclosure must be provided so that the unit is not

user accessible when incorporated into the final product.

The Model 8743-CL Picomotor Controller/Driver internally

generates non-SELV voltages. These voltages are present, at

times, on the Picomotor connectors even when a Picomotor is

not connected. The user shall mount the Model 8743-CL with

appropriate barriers, spacings, markings, etc. to ensure that all

applicable regulatory requirements are met. THIS IS THE

USER'S RESPONSIBILITY.

Do not attempt to operate this equipment if there is evidence of

shipping damage or you suspect the unit is damaged. Damaged

equipment may present additional hazards to you. Contact New

Focus technical support for advice before attempting to plug in

and operate damaged equipment.

The Model 8743-CL is intended for use ONLY with New Focus

Picomotors. Connection of other devices to the unit's motor

connectors may cause damage to the unit or the connected

device, fire, and/or personal injury.

Before operating the Model 8743-CL Picomotor Driver, please