Using Ethernet Routers/Switchers; Connecting Three Units To A Computer Via An Ethernet Router - Newport New Focus Picomotor 8743-CL User Manual

Controller/driver

Table of Contents

4.7.2

Using Ethernet Routers/Switchers

If several 8743-CL units need to be controlled via Ethernet, connect them to a router at the

LAN (Local Area Network) ports. The router will assign an IP address to each 8743-CL

Controller/Driver. Connect a computer to the same router at one LAN port. Use the

Picomotor Application provided on the USB Flash Drive to discover and establish a

connection to each 8743-CL unit.

Table of Contents