Newport New Focus Picomotor 8743-CL User Manual page 117

VE?
Controller firmware version query.
Description
VE?
Syntax
This command is used to query the controller model number and firmware version. To query
Remarks
product serial number information see *IDN command.
Response
ss
VE
Example
8743-CL Version 1.9 11/01/12
*IDN?
See Also
XX
Purge all user settings in controller memory.
Description
XX
Syntax
This command is used to purge all user settings in the controller non-volatile memory and
Remarks
restore them to factory default settings.
The following parameters are affected by this command:
1. Hostname (see HOSTNAME command)
2. IP Mode (see IPMODE command)
3. IP Address (see IPADDRESS command)
4. Subnet mask address (see NETMASK command)
5. Gateway address (see GATEWAY command)
6. Configuration register (see ZZ command)
7. Motor type (see QM command)
8. Desired Velocity (see VA command)
9. Desired Acceleration (see AC command)
10. Closed-Loop interval (see CL command)
11. Deadband (see DB command)
12. Following Error (see FE command)
13. Units (see SN commands)
14. Hardware Configuration (see ZH command)
XX
Example
*RCL
See Also
Value
String
(Purge all user settings)
Description
8743-CL Version 1.9 11/01/12
version = 1.; release date = 11/01/12
(Get model name and firmware version)
(Replies with model and firmware info string)
117