Table of Contents
Advertisement
56
5.6
Picomotor Controller Software Application
5.6.1
Introduction
Included with the Picomotor controller is a Windows software application to facilitate
quick, user-friendly motion system check via controller's USB or Ethernet interfaces. This
application comes on a USB flash drive or can be downloaded from the product's
Newport.com web page 'Downloads' section.
NOTE: If you already have installed a different version of the software and drivers
then it is recommended that you uninstall it first before installing new software.
Before connecting the instrument to a host PC using a standard Micro-B to USB-A cable,
the user should install the application included in the USB Flash Drive that accompanies
the Unit. The application automatically installs the correct USB drivers. Communication
can be done through this interface by using the application or by developing software in
the user's preferred programming language. The USB Flash Drive contains the
communication drivers and software for operating the controller/driver.
Picomotor Application Software
Advertisement
Table of Contents
