Table of Contents
Advertisement
6
Chapter 1
1.4.2
Symbols
The following symbols are used in this manual and on the instrument:
!
1.5
General Warnings and Cautions
The following general warning and cautions are applicable to this instrument:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
General Information
Refer to the documentation.
Earth Ground
WARNING
This instrument is intended for use by qualified personnel
who recognize shock hazards or laser hazards and are
familiar with safety precautions required to avoid possible
injury. Read the instruction manual thoroughly before
using, to become familiar with the instrument's operations
and capabilities.
WARNING
The American National Safety Institute (ANSI) states that
a shock hazard exists when probes or sensors are exposed
to voltage levels greater then 42 VDC or 42V peak AC.
Do not exceed 42V between any portion of the Model
8000 (or any attached detector or probe) and earth ground
or a shock hazard will result.
There are no serviceable parts inside the Model 8000.
Work performed by persons not authorized by Newport
Corporation may void the warranty. For instructions on
obtaining warranty repair or service please refer to
Chapter 7 of this manual.
CAUTION
Advertisement
Table of Contents
