Newport New Focus Picomotor 8743-CL User Manual page 121

ETHERNET RELATED COMMANDS
GATEWAY
Default gateway address set.
Description
GATEWAY address
Syntax
This command is used to set the Ethernet default gateway address. In order for this setting to
Remarks
take effect, please set the controller to Static IP mode (IPMODE), save (SM) this parameter in
the controller's non-volatile memory, and reset (RS) the controller.
NOTE: Send this command via USB interface as Ethernet communication may become
Argument
address
IPMODE 0
Example:
GATEWAY
NETMASK 255.255.255.0
IPADDR 192.168.1.101
SM; RS
IPMODE, SM, RS
See Also
GATEWAY?
Default gateway address query.
Description
GATEWAY?
Syntax
This command is used to query the default gateway address
Remarks
Response
address
GATEWAY?
Example:
192.168.10.101
IPMODE, GATEWAY
See Also
unstable during Ethernet settings configuration. While connected via USB, use
the Picomotor application software to send commands (Go to 'Terminal' tab).
Value
nn1.nn2.nn3.nn4
192.168.10.101
Value
nn1.nn2.nn3.nn4
(Get gateway address)
(Returns
Description
Gateway address. (Example. 192.168.10.101)
nn1,nn2,nn3,nn4 can be numbers between 0 and 255.
(Set to static IP mode)
(Set gateway address)
(Set Netmask address)
(Set IP address)
(Save and reset system)
Description
Gateway address. (Example. 192.168.10.101)
nn1,nn2,nn3,nn4 can be numbers between 0 and 255.
gateway address)
192.168.10.101;
121