Table of Contents
Advertisement
Safety Precautions
•
•
•
•
•
•
•
1.2.2
General Cautions
Observe these cautions when operating this equipment:
•
•
•
•
•
•
1.2.3
Summary of Warnings and Cautions
The following general warning and cautions are applicable to this instrument:
The Model 8742 is typically supplied with an external DC power
source. When the external power source is connected to MAINS
power, the external power source's detachable power cord may be
used to disconnect power to the 8742. Do not position the external
power supply so that its MAINS power cord cannot be easily
disconnected.
Disconnect power before cleaning the equipment. Do not use liquid
or aerosol cleaners; use only a damp lint-free cloth.
Lockout all electrical power sources before servicing the equipment.
There are no user-replaceable fuses in this equipment. The user
must ensure that appropriate current-limiting protection is provided
by the external DC power source.
To avoid explosion, do not operate this equipment in an explosive
atmosphere.
Qualified service personnel should perform safety checks after any
service.
Use only the New Focus-supplied MAINS power cord with the
external DC supply. Use of under-rated power cords and cause
property damage
If this equipment is used in a manner not specified in this manual,
the protection provided by this equipment may be impaired.
Do not block ventilation openings.
Use only the specified replacement parts.
Follow precautions for static sensitive devices when handling this
equipment.
This product should only be powered as described in the manual.
There are no user-serviceable parts inside the Model 8742
Picomotor Drive Module.
The Picomotor Controller/Driver is incomplete in constructional
features and is considered only to be a component for the
purposes of regulatory compliance. It is "equipment for building
in;" a suitable enclosure must be provided so that the unit is not
user accessible when incorporated into the final product.
WARNING
15
Hide quick links:
Advertisement
Table of Contents
