Table of Contents
Advertisement
XPS Motion Controller/Driver
EDH0205En1051 – 10/17
The Exclamation Symbol in Figure 1 may appear in Warning and Caution tables in this
document. This symbol designates an area where personal injury or damage to the
equipment is possible.
1.2.2
Electric Shock
The Electrical Shock Symbol in Figure 2 may appear on labels affixed to the XPS
Series Controller/Driver. This symbol indicates a hazard arising from dangerous
voltage. Any mishandling could result in damage to the equipment, personal injury, or
death.
1.2.3
European Union CE Mark
The presence of the CE Mark on Newport Corporation equipment means that it has
been designed, tested and certified as complying with all applicable European Union
(CE) regulations and recommendations.
1.2.4
"ON" Symbol
The "ON" Symbol in Figure 4 appears on the power switch of the XPS Series
Controller/Driver. This symbol represents the "Power On" condition.
1.2.5
"OFF" Symbol
The "Off" Symbol in Figure 5 appears on the power switch of the XPS Series
Controller/Driver. This symbol represents the "Power Off" condition.
1.3
Warnings and Cautions
The following are definitions of the Warnings, Cautions and Notes that may be used in
this manual to call attention to important information regarding personal safety, safety
and preservation of the equipment, or important tips.
Figure 2: Electrical Shock Symbol.
Figure 3: CE Mark.
Figure 4: "ON" Symbol.
Figure 5: "OFF" Symbol.
WARNING
Situation has the potential to cause bodily harm or death.
2
Quick Start
Advertisement
Table of Contents
