General Warnings; General Cautions - Newport New Focus Picomotor 8743-CL User Manual

Specifications
1.2.1

General Warnings

Observe these general warnings when operating or servicing this equipment:
Heed all warnings on the unit and in the operating instructions.
•
Do not use this equipment in or near water.
•
Although the input power to this equipment is below 20 VDC, this equipment internally
•
generates much higher voltages that are present on the Model 8743-CL connector pins. Only
properly trained personnel should touch either of these items.
The Model 8743-CL is intended to be used as a component in a larger system. When this
•
product is included as part of a larger assembly, the user MUST ensure that appropriate
additional safety and EMC-compliance features are incorporated the assembly.
• The Model 8743-CL is typically supplied with an external DC power source. When the external
power source is connected to MAINS power, the external power source's detachable power cord
may be used to disconnect power to the 8743-CL. Do not position the external power supply so
that its MAINS power cord cannot be easily disconnected.
Disconnect power before cleaning the equipment. Do not use liquid or aerosol cleaners; use
•
only a damp lint-free cloth.
Lockout all electrical power sources before servicing the equipment.
•
There are no user-replaceable fuses in this equipment. The user must ensure that appropriate
•
current-limiting protection is provided by the external DC power source.
To avoid explosion, do not operate this equipment in an explosive atmosphere.
•
• Qualified service personnel should perform safety checks after any service.
Use only the New Focus-supplied MAINS power cord with the external DC supply. Use of
•
under-rated power cords and cause property damage
1.2.2

General Cautions

Observe these cautions when operating this equipment:
• If this equipment is used in a manner not specified in this manual, the protection provided by
this equipment may be impaired.
• Do not block ventilation openings.
Use only the specified replacement parts.
•
Follow precautions for static sensitive devices when handling this equipment.
•
• This product should only be powered as described in the manual.
There are no user-serviceable parts inside the Model 8743-CL Picomotor Drive Module.
•
Situation has the potential to cause the product to not comply
with applicable United Kingdom regulations.
17