18
Safety Precautions
1.2.3
Summary of Warnings and Cautions
The following general warning and cautions are applicable to this instrument:
Before operating the Model 6100 Laser Diode and Temperature
Controller, please read and understand all of Sections 1 thru 4.
Do not attempt to operate this equipment if there is evidence of
shipping damage or you suspect the unit is damaged. Damaged
equipment may present additional hazards to you. Contact
Newport technical support for advice before attempting to plug
in and operate damaged equipment.
To avoid electric shock, connect the instrument to properly
earth-grounded, 3-prong receptacles only. Failure to observe
this precaution can result in severe injury.
Before cleaning the enclosure of the Model 6100 Laser Diode
and Temperature Controller, the AC power cord must be
disconnected from the wall socket.
There are no user serviceable parts inside the Model 6100 Laser
Diode and Temperature Controller. Work performed by persons
not authorized by Newport Corporation will void the warranty.
For instructions on obtaining warranty repair or service, please
refer to Section 8.
If this equipment is used in a manner not specified in this
manual, the protection provided by this equipment may be
impaired.
WARNING
WARNING
WARNING
WARNING
CAUTION
WARNING