Converting From Transport To Field Mode - MacDon R113 Operator's Manual

11. Operate the hitch swing control lever to ensure the
carrier frame (A) and hitch (B) are locked together.
12. Activate the hazard lights (C) on the mower conditioner.
Check that all lights are working.
13. Ensure that the slow moving vehicle sign (D) is visible
from behind the mower conditioner.
14. Once the field to transport conversion (A) is complete,
leave the switch in the upper position (C). Ensure that
light (B) is NOT illuminated.
For a reference on converting, refer to
™
Friendly Transport Decal, page

Converting from Transport to Field Mode

DANGER
Do not convert the machine into, or from, transport mode until you are certain that all people, animals, and
objects are clear of the unit's rotational range.
WARNING
Ensure cutterbar doors are properly closed before converting the machine from field to transport mode to
prevent equipment damage.
147910
OPERATION
7.4 Converting Road
273.
76
Figure 3.86: Transport Mode
Figure 3.87: Remote Control
Revision A