Maintenance And Servicing; Preparing Machine For Servicing - MacDon R113 Operator's Manual

4 Maintenance and Servicing

The following instructions provide information about routine mower conditioner service. Detailed maintenance and
service information is contained in the technical manual that is available from your Dealer. A parts catalog is located
in a plastic case at the right end of the mower conditioner.
Log hours of operation and use the maintenance record provided (refer to
111) to keep track of your scheduled maintenance.
page

4.1 Preparing Machine for Servicing

CAUTION
To avoid personal injury, perform the following procedures before servicing mower conditioner or opening
drive covers:
1. Lower the mower conditioner fully. If necessary to service in the raised position, always close lift cylinder lock-out
valves. Refer to
3.1 Lift Cylinder Lock-Out Valves , page
2. Disengage power take-off (PTO).
3. Stop engine and remove key.
4. Engage park brake.
5. Wait for all moving parts to stop.
147910
4.3.1 Maintenance Schedule/Record,
31.
107
Revision A