Unplugging The Mower Conditioner - MacDon R113 Operator's Manual

3.18 Unplugging the Mower Conditioner

DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop tractor engine and remove
key before removing plugged material from mower conditioner.
1. Stop forward movement of the tractor and stop the power take-off (PTO).
2. Raise the mower conditioner fully, shut down the tractor engine, and remove the key.
3. Engage lift cylinder lock-out valves. Refer to
WARNING
Wear heavy gloves when working around cutterbar.
4. Open cutterbar doors.
Cutterbar Doors, page
5. Clean off cutterbar or rolls by hand.
147910
OPERATION
3.1.1 Engaging Locks, page
Refer to
3.3.1 Opening
36.
31.
Figure 3.127: Cutterbar Doors
105
Revision A