Break In Inspections - MacDon R113 Operator's Manual

Mower conditioner drive gearbox lube (first
▲ 50 and then every 250 hours) - Refer to
4.5.10 Mower Conditioner Drive Gearbox
(T-Gearbox) (MD #224211), page 211
Driveline gearboxes (4) lube (first 50 and then
▲
every 250 hours) - Refer to
Gearbox, page 216
250 Hours
▲ Cutterbar lube - Refer to
Level, page 127
Roll conditioner drive gearbox - Refer to
▲
Conditioner Drive Gearbox (MD #221748),
page 209
Mower conditioner drive gearbox lube - Refer
▲
to
4.5.10 Mower Conditioner Drive Gearbox
(T-Gearbox) (MD #224211), page 211
▲ Driveline gearboxes (4) lube - Refer to
Swivel Gearbox, page 216

4.3.2 Break In Inspections

Table 4.1 Break In Inspection Schedule
Inspection
Interval
1
Wheel bolts
Hour
Check for loose hardware and
5
tighten to required torque
Hours
Check drive belt tension
Check drive belt tension
25
Hours
Check driveline taper pin torque
147910
MAINTENANCE AND SERVICING
4.5.11 Swivel
Checking Lubricant
4.5.9
4.5.11
Item
Checking Wheel Bolts, page 218
7.2 Torque Specifications, page 260
Inspecting Conditioner Drive Belt, page 205
Inspecting Conditioner Drive Belt, page 205
4.5.6 Inspecting Driveline Taper Pins, page 200
Refer to
113
Revision A