Installing Cutterbar Spindles - MacDon R113 Operator's Manual

7. Remove spacer plate (A).
8. Rotate spindle hub (A) to access nuts, and remove 11
M12 lock nuts (B) and washers.
9. Remove spindle (A) from cutterbar.

Installing Cutterbar Spindles

DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove
key, and engage header lift cylinder lock-out valves before going under machine for any reason.
147910
MAINTENANCE AND SERVICING
136
Figure 4.34: Spacer Plate
Figure 4.35: Left-Hand Spindle Hub
and Hardware
Figure 4.36: Left-Hand Spindle
Revision A