Installing Cutterbar Door Curtains - MacDon R113 Operator's Manual

Installing Cutterbar Door Curtains

The procedure for installing cutterbar door curtains is the same for both sides.
1. Insert the cutterbar door bolts into the precut curtain
holes (A).
2. Install shield panel (A).
3. Install five nuts (B) onto bolt studs and torque to 23 ft·lbf
(32 N·m).
4. Close cutterbar door. Refer to
Doors, page 38.
147910
MAINTENANCE AND SERVICING
3.3.3 Closing Cutterbar
153
Figure 4.68: Curtain Installed onto Bolts
Figure 4.69: Shield Panel Installed with Nuts
Figure 4.70: Cutterbar Doors in Closed Position
Revision A