Connecting Hydraulics - MacDon R113 Operator's Manual

12. Raise stand (A), rotate lock (B) clockwise to vertical
position, and re-engage lock (B) to hold the stand in
the storage location.
13. Secure lock with lynch pin (A).

3.7.3 Connecting Hydraulics

WARNING
Do NOT use remote hydraulic system pressures over 3000 psi (20,684 kPa). Check your tractor operator's
manual for remote system pressure.
NOTE:
Refer to numbered/colored bands on hoses to identify lift, swing/transport, and tilt hose sets.
147910
OPERATION
Figure 3.32: Hitch Stand
Figure 3.33: Hitch Stand
47
Revision A