Removing Non-Driven Rotary Deflectors - MacDon R113 Operator's Manual

12. Close cutterbar doors. Refer to
Doors, page 38.
Removing Non-Driven Rotary Deflectors
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove
key, and engage header lift cylinder lock-out valves before going under machine for any reason.
CAUTION
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear
gloves when handling blades.
1. Open cutterbar doors.
Cutterbar Doors, page
147910
MAINTENANCE AND SERVICING
3.3.3 Closing Cutterbar
Refer to
3.3.1 Opening
36.
Figure 4.117: Cutterbar Doors in
Closed Position
Figure 4.118: Cutterbar Doors
172
Revision A