Drive Systems; Driveline Shield Cone; Removing Driveline Shield Cone; Installing Driveline Shield Cone - MacDon R113 Operator's Manual
Pull-type rotary disc mower conditioner
Hide thumbs
Also See for R113:
- Operator's manual (276 pages) ,
- Assembly instruction manual (212 pages) ,
- Unloading and assembly instructions (166 pages)
Table of Contents
Advertisement
4.5 Drive Systems
4.5.1 Driveline Shield Cone
Removing Driveline Shield Cone
WARNING
Do NOT operate the machine without the driveline shield cones in place and the lever clamps
securely fastened.
1. Release two lever clamps (A) using a screwdriver or
similar prying tool.
2. Unhook safety chain (B) from hitch, and ensure that
chain is secured to the shield cone and metal plate.
3. Remove shield cone from metal plate (A) and slide
cone along drive shaft.
Installing Driveline Shield Cone
WARNING
Do NOT operate the machine without the driveline shield cones in place and the lever clamps
securely fastened.
147910
MAINTENANCE AND SERVICING
182
Figure 4.142: Driveline Shield Cone and
Lever Clamp
Figure 4.143: Driveline Shield Cone Removed
from Metal Plate
Revision A
Advertisement
Table of Contents
Troubleshooting
