Removing Cutterbar Door Curtains - MacDon R113 Operator's Manual

Check cutterbar curtains for the following conditions:
• Rips and tears: Replace curtain.
• Cracking: While the curtain may look whole, this is an
indicator that failure is imminent—replace curtain.
• Missing bolts:
before operating.

Removing Cutterbar Door Curtains

The procedure for removing cutterbar door curtains is the same for both doors.
1. Open cutterbar door. Refer to
Doors, page 36.
2. Remove five nuts (A) from the bolt studs.
3. Remove shield panel (B).
4. Remove curtain (C).
147910
MAINTENANCE AND SERVICING
Replace missing hardware
3.3.1 Opening Cutterbar
Figure 4.65: Cutterbar Curtains
Figure 4.66: Cutterbar Doors
Figure 4.67: Nuts Securing Shield Panel and
Curtain to Cutterbar Door
152
Revision A