Removing Cutterbar Inboard Curtain - MacDon R113 Operator's Manual

Removing Cutterbar Inboard Curtain

1. Open cutterbar doors.
Cutterbar Doors, page
2. Remove two M10 carriage head bolts (A) and
nuts securing curtain assembly (B) to the mower
conditioner, and remove curtain assembly.
3. Remove four nuts (A) from weld studs on center shield,
remove two curtain brackets (B), and remove curtain.
147910
MAINTENANCE AND SERVICING
Refer to
3.3.1 Opening
36.
Figure 4.71: Cutterbar Doors
Figure 4.72: Inboard Curtain
Figure 4.73: Inboard Curtain, Nuts, and Brackets
154
Revision A