Tall Crop Divider Option; Removing Tall Crop Divider - MacDon R113 Operator's Manual

6. Repeat steps two through step four to install right
deflector (A).
7. Align deflectors at position (B) and tighten bolts (C) to
specified torque with a 16 mm socket and an 8 mm
hex key.

3.15.12 Tall Crop Divider Option

Tall crop dividers (one on each end of the mower conditioner) assist in clean crop dividing and cutterbar entry in tall
crops. Tall crop dividers are not adjustable, but they are removable.

Removing Tall Crop Divider

DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving Operator's seat for any reason.
1. Lower mower conditioner fully, shut down tractor and
mower conditioner, and remove key.
2. Open cutterbar doors.
Cutterbar Doors, page
147910
OPERATION
Refer to
3.3.1 Opening
36.
Figure 3.122: Right Cutterbar Deflector Viewed
from Underside of Cutterbar
Figure 3.123: Cutterbar Doors
99
Revision A