Installing Cutterbar Inboard Curtain - MacDon R113 Operator's Manual

Installing Cutterbar Inboard Curtain

1. Open cutterbar doors.
Cutterbar Doors, page
2. Install curtain onto weld studs on center shield, install
two curtain brackets (B), and secure with four nuts (A).
3. Secure two curtain brackets (A) to center shield using
two M10 carriage head bolts (B) and nuts.
4. Torque bolts (A) to 30 ft·lbf (40 N·m).
147910
MAINTENANCE AND SERVICING
Refer to
3.3.1 Opening
36.
Figure 4.74: Cutterbar Doors
Figure 4.75: Inboard Curtain and Brackets
Figure 4.76: Inboard Curtain Attached to
Mower Conditioner
155
Revision A