Converting From Field To Transport Mode - MacDon R113 Operator's Manual

Converting from Field to Transport Mode

DANGER
Do not convert the machine into, or from, transport mode until you are certain that all people, animals, and
objects are clear of the unit's rotational range.
DANGER
Stop the power take-off (PTO) before converting the unit into transport mode. The cutting discs continue
to spin after the drive is turned off.
WARNING
Ensure cutterbar doors are properly closed before converting the machine from field to transport mode to
prevent equipment damage.
1. Start tractor if not running.
mower conditioner.
2. Following the field to transport decal (A), move
transport switch to the lower position (C) and ensure
that light (B) is illuminated.
147910
OPERATION
Do NOT operate the
73
Figure 3.79: Remote Control
Revision A