Preseason Servicing; End-Of-Season Servicing - MacDon R113 Operator's Manual

Pull-type rotary disc mower conditioner
Table of Contents

Advertisement

Inspection
Interval
Check drive belt tension
Change cutterbar lubricant
Change roll conditioner drive
50
gearbox lubricant
Hours
Change swivel gearbox (4) lubricant
Change mower conditioner drive
gearbox lubricant
Change cutterbar lubricant
Change swivel gearbox (4) lubricant
250
Hours
Change mower conditioner drive
gearbox lubricant

4.3.3 Preseason Servicing

CAUTION
• Review the operator's manual to refresh your memory on safety and operating recommendations.
• Review all safety signs and other decals on the mower conditioner and note hazard areas.
• Ensure all shields and guards are properly installed and secured.
safety equipment.
• Make certain you understand and have practiced safe use of all controls. Know the capacity and the
operating characteristics of the machine.
• Check the first aid kit and fire extinguisher. Know where they are and how to use them.
Perform the following procedures at the beginning of each operating season:
1. Lubricate machine completely. Refer to
2. Check tire pressure and adjust as required. Refer to
3. Perform all annual maintenance. Refer to

4.3.4 End-of-Season Servicing

Perform the following procedures at the end of each operating season:
CAUTION
Never use gasoline, naphtha, or any volatile material for cleaning purposes. These materials may be toxic
and/or flammable.
CAUTION
Cover cutterbar to prevent injury from accidental contact.
1. Clean the mower conditioner thoroughly.
147910
MAINTENANCE AND SERVICING
Item
Inspecting Conditioner Drive Belt, page 205
4.4.1 Cutterbar Lubrication, page 127
Use only specified amount. Do NOT overfill.
4.5.9 Conditioner Drive Gearbox (MD #221748), page 209
4.5.11 Swivel Gearbox, page 216
4.5.10 Mower Conditioner Drive Gearbox (T-Gearbox)
(MD #224211), page 211
4.4.1 Cutterbar Lubrication, page 127
4.5.11 Swivel Gearbox, page 216
4.5.10 Mower Conditioner Drive Gearbox (T-Gearbox)
(MD #224211), page 211
4.4.1 Cutterbar Lubrication, page
4.3.1 Maintenance Schedule/Record, page
Refer to
127.
Inflating Tires, page
220.
114
Never alter or remove
111.
Revision A

Advertisement

Table of Contents
loading

This manual is also suitable for:

R116

Table of Contents