1. Slide shield cone along drive shaft until it is seated in
metal plate (A).
2. Securely fasten two lever clamps (A) to metal plate (B).
3. Attach safety chain (C) to hitch, and ensure that chain
is secured to the shield cone and metal plate.
4.5.2 Primary Driveline
The primary driveline transfers power from the tractor's
power take-off (PTO) to the mower conditioner's forward
swivel gearbox. Follow regular lubrication procedures and
ensure all driveline taper pins are torqued as instructed.
Refer to
4.4.1 Cutterbar Lubrication, page
147910
MAINTENANCE AND SERVICING
127.
183
Figure 4.144: Driveline Shield Cone Removed
from Metal Plate
Figure 4.145: Driveline Shield Cone and
Lever Clamp
Figure 4.146: Primary Driveline
Revision A