Operation
Calibrate (
): This button begins the screen calibration
procedure; it is recommended that a stylus be used for this to
ensure the proper precision.
NOTE: Do not use sharp objects for the calibration procedure,
as the screen can be seriously damaged.
Default (
): This button returns the touchscreen back to the
factory default settings for brightness and volume.
Configuration
Touch the Config button on the menu to bring up the Device
Setup screen.
Device Setup screen
The Device Setup screens allow the user to configure the Vision
tester for communication and use with accessories. It can also
be accessed by touching the Setup button at the bottom of the
Device Setup screen.
Instrument tab
The Instrument tab allows for the configuration of the instrument
ID and network communication settings. For more information
on TCP/IP configuration, refer to appendix B.
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019
57 of 158