Vessel Cover Installation - Teledyne VISION G2 CLASSIC 6 User Manual

Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019
To release the paddle or basket shaft, grasp the shaft clamp,
then rotate the paddle or basket shaft clockwise out of the
spindle shaft. If the shaft releases with a slight pop it has been
properly tightened.
When the tester is in operation, ensure that the key of the shaft
clamp and the key on the spindle itself are at the same level so
that they will lock together.
Fig. C-13 Shaft Clamp and Key in Position

Vessel Cover Installation

Easi-Lock Cover
Fig. C-14 Easi-Lock Cover 74-104-151
To install the hinged Easi-Lock vessel cover, with the drive head
down (Elite 8) and shafts in place:
1. Fold the cover so that a space can be created for
the spindle shaft to slide through. If an AutoMag or
SuperMag is installed, align the cover with the
sample probes.
Installation
47 of 158