Network Printer Troubleshooting - Teledyne VISION G2 CLASSIC 6 User Manual

Network Printer Troubleshooting

Problem
Tester will not print
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019
Possible Causes
IP address incorrect.
No PostScript support.
Printer settings incorrect.
Troubleshooting
Recommended Action
Set the IP address of tester to
work with printer.
Switch to a printer with
PostScript supported by the
printer firmware.
Ensure printer settings are
correct for printer in system
configuration.
130 of 158