Protocols - Teledyne VISION G2 CLASSIC 6 User Manual

Operation

Protocols

Protocols can be accessed by touching the Protocols button on
the main menu, or from the home screen by touching the [Select
Protocol] or protocol name displayed in the upper left corner of
the home screen.
Protocols are a list of parameters and events that are required
to perform a dissolution test. These parameters can be modified
to accommodate the user needs. Up to 100 different protocols
can be stored.
Recent tab
The Recent tab displays the 20 protocols which were used most
recently.
Page # tabs
The Page # tabs display the protocols in alphabetical order
based on protocol name.
Vision G2 Testers User Guide—74-108-800 Rev. H—12 June 2019 76 of 158