0205 Jam Occurs Due To The Deformation Of The Pre-Transfer Guide - Canon imageRUNNER ADVANCE 8105 Series Manual

Symptom

0205 Jam occurs due to the deformation of the pre-transfer guide

[Inspected by Canon Inc. ]
Description
0205 jam occurred.
0205:Registration sensor stationary jam
Cause
In a jam clearance process, when the fixing/ feeder duplexing assembly is pulled out while the right door
remains closed and then the paper is forcibly removed, the paper is caught between the right door assembly
and the fixing/ feeder duplexing and pulled. Consequently, the stress was applied to the pre-transfer guide,
resulting in the deformation of the area [a], which caused another paper jam.
[Reference] When the area of the part is slightly deformed, images at the leading edge are soiled.
Field Remedy
When the symptom occurs, prepare the pre-transfer corona assembly (FM3-7297-000) and follow the
procedure below to replace the part.
[Caution] When removing the primary charging assembly and the pre-transfer corona assembly, go through
the following procedure while the charging shutter is open. If any of the below operations are not performed,
it may be po ssible to remove the assembly while the charging shutter is closed, which may damage the
drum or the shutter.
A) At sleep mode, press the power switch on the control panel, check that the machine is in standby
condition, turn OFF the main power, and then remove the part.
B) In the case that the condition of the charging shutter (open/close) is unknown while the power of the host
machine is OFF, turn ON the power, check that the machine is in standby condition, turn OFF the main
power, and then remove the part.
pg. 43