Canon imageRUNNER ADVANCE 8105 Series Manual page 29

Symptom
0101/0102/0103/0106/0107/0108/010A/010D Jam Code due to the contamination on/the life of the
Pickup Roller
[Inspected by Canon Inc. ]
Description
There were cases when any of 0101/0102/0103/0106/0107 Jams occurred.
0101: Right Deck Pickup Sensor 1 Delay Jam
0102: Right Deck Pull Out Sensor Delay Jam
0103: Vertical Path Sensor 1 Delay Jam
0106: Left Deck Pickup Sensor 1 Delay Jam
0107: Left Deck Pull Out Sensor Delay Jam
0108: Duplex Merging Sensor Delay Jam
010A: Cassette 3 Pickup Sensor 1 Delay Jam
010D: Cassette 4 Pickup Sensor 1 Delay Jam
Cause
The pickup roller [1], the feed roller [2], and the separation roller [3] failed to feed paper as they were
contaminated with paper dust or near the end of their life. Accordingly, jam occurred.
Field Remedy
According to the jam code indicated, clean the following pickup roller, feed roller, and separation roller in the
pickup assembly.
Jam Code
0101 / 0102 / 0103
0106 / 0107
Clean the entire circumference of each roller with lint-free paper moistened with alcohol, while rotating the
roller with your hands.
If no improvement is seen even after cleaning, replace the rollers.
[Reference] The expected life of the Pickup Roller, the Feed Roller, and the Separation Roller is equivalent
to printing of about 500,000 sheets, as calculated using A4/LTR size plain paper.
[Replacement Parts]
FC5-2524 ROLLER, PAPER PICK-UP (Right Deck, Left Deck, Cassette 3, Cassette 4)
FC5-2526 ROLLER, PAPER FEEDER (Right Deck, Left Deck Cassette 3, Cassette 4)
FC5-2528 ROLLER, SEPARATION (Right Deck, Left Deck Cassette 3, Cassette 4)
Paper Source
Right Deck
Left Deck
Jam Code Paper Source
010A Cassette 3
010D Cassette 4
pg. 29