Canon imageRUNNER ADVANCE 8105 Series Manual page 300

[Caution] When mounting the Hopper Drive unit, be sure that the 28T Gear [1] is securely fit.
b-15) Remove the Operator Lever from the Hopper assembly once. In reverse order of Step b-7), mount the
Set-on Cover (Right) and the Operator Cover.
b-16) Check that the Bottle Cam [2] and Bottle Box [3] work smoothly by turning the Operator Lever [1] to
set/ release the Toner Bottle position for several times.
b-17) Reassemble the parts from Step b-6) through Step b-1) as well as from Step 6) in reverse order in
"steps in common".
[Replacement Parts]
FU0-0055 GEAR, BEVEL, 13T/48T
FU0-0054 GEAR, BEVEL, 16T
XD9-0293 PIN, PARALLEL
FL3-7929 CAM, BOTTLE
pg. 300