[Ir-Adv 8105 Series Cleaning Location Inside Machine] - Canon imageRUNNER ADVANCE 8105 Series Manual

[iR-ADV 8105 Series Cleaning Location inside Machine]

From analysis of the service call data on iR-ADV 8105 series, it is found that many visits have been made for
the image failure due to the contamination inside the machines. By cleaning, during visit due to a call, the
locations inside the machine where the toner can easily be adher ed, the number of calls is reduced
regarding the image soil resulting from such locations.
For this reason, clean the parts below during visit due to a call or during replacement of parts.
<Cleaning Location & Cleaning Timing>
Clean the following nine locations during visit and during parts replacement work.
No Location
1 Hopper Assembly
2 Pre Transfer Charging Assembly
3 Registration Assembly
4 Fixing Entrance Guide Assembly
5 Pre-Registration Guide Assembly
AP Kit
6 (Separation Claw, Separation Claw
Holder and plate)
7 Guide to insert AP Kit
8 Developing Assembly
9 Developing Assembly Guide Mount
<Cleaning Location>
For details of the cleaning locations, refer to the following pages.
Cleaning Timing
During visit
During visit
During visit
During visit
During visit
When AP Kit is removed and inserted
When AP Kit is removed and inserted, or at every 500
thousand sheets
Every 500 thousand sheets, or when toner is
accumulated on the top of the pre transfer charging
assembly
Every 500 thousand sheets, or when toner is
accumulated on the top of the pre transfer charging
assembly
pg. 315