[Professional Puncher-C1 Die Oiling Procedure] - Canon imageRUNNER ADVANCE 8105 Series Manual

[Professional Puncher-C1 Die Oiling Procedure]

The puncher die needs regular application of different kinds of oil to the pins and the shoulder bolts.
Apply a light coating of high quality machine oil (e.g.,: "3-IN-ONE") which is commercially available, to the
pins of the puncher die after 50,000 punch cycles, and Super Lube, a light coating of Teflon based grease, to
the shoulder bolts after 200,000 punch cycles.
There are some kinds of puncher dies, but there are mainly two ways of oiling. Suppose that they are called
Type A and Type B, here.
How to check the counter of the part (puncher die) and lubricate the die for each type are described as
follows:
<Checking the counter of the part (puncher die)>
Check the appropriate counter value of the part (puncher die) in the service mode below, and write down the
value in service history (service resume). Do not clear the counter value in service mode!
-
COPIER > COUNTER > DRBL-2 > DIESET1 - DIESET64
pg. 325