Canon imageRUNNER ADVANCE 8105 Series Manual page 141

1) Separate the finisher from the copier main body.
2) Replace the old type roller shafts [A](FC9-3383-000)/ [C](FC9-3388-000) with the new type
[B](FC9-3383-010)/ [D](FC9-3388-010). Each of the new type roller shafts has the groove shape [a]
added as an identification mark.
3) Regarding the follower sliders for supporting the 2 kinds of roller shafts that were changed in the above
step 2), replace the old type [E] with the new type [F](FC6-5835-000) at the same time.
4) Other than the 2 kinds of roller shafts to be replaced, there is another roller shaft [5](FC9-3377).
During the service work, be sure to replace 2 follower sliders [4] for supporting above roller shaft
(FC9-3377) with the new type as well.
pg. 141