Staple Does Not Work With The Printer Driver Ufrii Ver.20.80 Or Later - Canon imageRUNNER ADVANCE 8105 Series Manual

Symptom

Staple does not work with the printer driver UFRII Ver.20.80 or later

[Inspected by Canon Inc. ]
Description
When printing a set of PDF or Word file from the printer driver UFRII Ver.20.80, staple was not performed in
spite of the staple had been set to be performed.
Cause
When printing a set of a file, some applications gives the finishing settings as "Group" to the printer
driver. Also, with the printer driver UFRII Ver.20.80 or later, the control of the finishing settings is changed
to the operation to prioritize application. For this reason, "Group" setting on the application side is
prioritized over "Staple + Collate" which was set up on the printer driver side, so that staple was not
performed.
Field Remedy
To workaround this issue, change the settings of the printer driver as below:
Printer Properties > Device Settings > Details > Put a check for "Prioritize Finishing Settings of Driver"
pg. 314